Conductivity Electrodes
OHAUS™ Starter Water Analysis Meter Replacement Electrodes
Replacement electrodes for Starter portable and benchtop meters.
Hach Company Sension+ 5060 portable platinum conductivity cell for general purpose applications
Sension+ 5060 is a three-pole platinum conductivity cell with a polycarbonate body and built-in temperature sensor. The 5060 has a fixed 1 meter cable and MP5 connector dedicated for use with Hach Sension+ Portable Conductivity meters. The 5060 is ideal for conductivity measurements in general aqueous applications.
Cole-Parmer Oakton Conductivity/Temp Probe, for 6 and 6+ Series Meters; K=1.0
Replacement Conductivity/Temp probe, K=1.0 for Oakton 6 and 6+ series meters
Hach Company Radiometer Analytical CDC511T Conductivity Cell with Temperature Sensor (4-pole Pt sensor, k = 1.0 cm-1)
The Radiometer CDC511T is a 4-pole conductivity cell with non-platinized, platinum sensor (k = 1.0 cm-1), integrated temperature sensor and TPX body. The CDC511T sensor's 4 platinum ring design ensures results in general aqueous and non-aqueous media over several decades of conductivity with a single cell, using just one calibration. The CDC511T can be used with a flow-through cell for pure water measurements and meets requirements of USP 24-NF19. It has a fixed cable with MAB6 plug for use with Radiometer Analytical CDM210/230/92 conductivity meters.
Hach Company Radiometer Analytical CDC749 Conductivity Cell for Microsamples - 2-pole platinized Pt probe, k = 1.7 cm⁻¹, 4 mm lower diameter, glass body, fixed cable with MAB6-style plug; compatible with MeterLab/CDM series
The Radiometer Analytical CDC749 is a compact 2-pole conductivity cell designed for precise conductivity measurement of microsamples and small-volume samples in test tubes. It features a platinized platinum electrode, a cell constant of 1.7 cm⁻¹, and a small lower diameter for limited sample volumes. The glass body and robust construction provide chemical compatibility and measurement stability.
- Designed for microsamples and test-tube measurements.
- Platinized platinum 2-pole electrode for stable conductivity readings.
- Cell constant k = 1.7 cm⁻¹ for accurate low-volume measurements.
- 4 mm lower diameter to fit small sample volumes.
- Glass body for chemical compatibility and dimensional stability.
- Fixed cable with a multi-pin plug for direct connection to compatible meters.
- Supplied with a certificate of conformity and a 12-month warranty.
Pendotech 1/4 Inch Hose Barb Single Use Conductivity Sensor
Single Use Conductivity Sensor, non-sterile, polysulfone 1/4 inch hose barb
Grainger Graphite Conductivity Sensor 0.48 Dia.
The Grainger Graphite Conductivity Sensor is a sensor used to measure the electrical conductivity in liquids. It has a 316 stainless steel body, graphite electrodes, and a 3/4" NPT process connection. The sensor has a max pressure rating of 3000 psi at 100°F and a max temperature rating of 750°F. It has a cell constant of 0.1 cm−1. The sensor can be used for applications such as boiler water level control, cooling tower conductivity control, reverse osmosis system monitoring, and water purification monitoring. It requires a compatible conductivity transmitter to provide power and convert the signal.
Cole-Parmer Oakton SS Cell Conductivity Probe, Epoxy, K=1.0; 2.5 ft Cable
Ultem Body, SS Electrodes Conductivity Cell for OAKTON Conductivity and TDS Meters, K=1.0, 2.5' Cable